Set Other Preferences

Updated on 09 Nov 2023
Contributors

Print
Dark
Light
PDF

Article summary

Did you find this summary helpful?

Thank you for your feedback

Set Other Preferences

There are several user preferences that you can change, other than color preferences (for example, the default directory to save text from the FIMS Viewer). These settings are kept in a user .ini file on your hard drive, but you can edit them directly in FIMS.

Note: Refer to User Option Settings for detailed information on each option you can change and their available values.

1. From anywhere in FIMS, select Tools > User Preferences.

2. Select All Other Preferences, and then click OK.
User Preferences Window
The Preferences tab is divided into three sections:

Section: Refers to the section of the .ini file where the preferences can be found (in this case, User is the only available section).
Option: Refers to the configuration feature that is affected by user preferences (for example, the color of disabled text or the default module that opens when you start FIMS).
Value: Refers to the settings that are available for each option.

3. Select the Option that you want to change. The list of available settings for the selected option appears in the Value section.

4. Select the desired Value and then click Apply.

Note: Refer to User Option Settings for detailed information on each option you can change and their available values.

5. Repeat this process for any other options you want to change. When you are finished, click OK.

Note: You may have to close and reopen FIMS for some of these changes to take effect.

Tip: Key Remapping

Key remapping options are not reflected on the Preferences tab on the User Preferences window and must be entered directly into the editor.

If you add Alt-S=F1 as a new line in the editor, you can press F1 on your keyboard (instead of Alt+S) to save records. This technique remaps any accelerator keys specified in Dynamic Menu Maintenance.

There are also several built-in functions: KeyRun, RunShowProcedure and RunProgress. If you add KeyRun=F12, pressing F12 on your keyboard opens the Run Procedure window.

Please contact FIMS Support for more information about key remapping.

User Option Settings

The following list of options provides detail about user preferences and their available values.

Note: This list includes color options and other user options. Although you can set color options here, you may find it easier to set them in the Color Preferences window. Refer to Setting Color Preferences for more information.

Option	Value	Description
CheckIsTrans	Yes or No	Choose Yes to check for transactions already in process when saving. If a transaction is already in process then the current saving of a record may not complete to the database, and be seen by others, until the transaction is complete. The default is to use the same System Option. This user preference overrides the System Option. When this occurs, the system will prompt to send an email to FIMS Support containing all processes and modules currently in memory. This would be used to help identify the process or module that has started the transaction. If you can work with FIMS Support at that moment, FIMS Support may be able to further isolate the offending module or process by closing each module or process one at a time and attempting a save again. If you cannot work with FIMS Support or attempt to isolate the culprit, it will be best to exit FIMS in order for the transaction to complete. Changing this option will not take effect until FIMS is restarted.
Color Disabled Text	RGB Color Codes	The RGB values of the color you want to use for disabled (unavailable) text. The background for disabled fields is light gray. The default disabled text color is dark gray (128,128,128). Note: Changing this value affects disabled text throughout Windows (not just in FIMS). Note: If you select <None>, the color is set to the default from your Windows display settings.
Color Module Active Title	RGB Color Codes	The RGB values of the color you want to use for the module title bar. Note: If you select <None>, the color is set to the default from your Windows display settings.
Color Module Title Text	RGB Color Codes	The RGB values of the color you want to use for the text on the module title bar. Note: White (255, 255, 255) is the best choice if you are using a dark-hued background color. Note: If you select <None>, the color is set to the default from your Windows display settings.
Color Required Fields	RGB Color Codes	The RGB values of the color you want to use to highlight required fields. The default value is yellow (255,255,0).
Context Menus	Yes No	Determines whether you want the Reports and File Maintenance menus to be context-sensitive (to automatically change when you switch modules). The default value is Yes.
Default Country	None or Country value	Default Country when adding profiles, otherwise country from system initial setup is used.
Default Module	<Default Module Name>	The module that you want to open automatically when you start FIMS. If you select <None>, the FIMS Navigator will open when you start FIMS.
FIMSHelp Default	1 2	The FIMS Help page that you want to open when you press F2 on the keyboard. If you select 1, the FIMS Notes page (read-only) will open by default. If you select 2, the User Notes (editable) page will open by default.
Font Size	Small Medium Large	The font size that you want to use for viewing text and objects within FIMS. The default value is based on the screen resolution on your system (but you can select the desired font size to override the default). Small: Sets the font size to 8 and the screen size to 640x480. This font is available for all screen resolutions. Medium: Sets the font size to 10 and the screen size to 800x600. This font is available for screen resolutions of 800x600 or higher. Large: Sets the font size to 12 and the screen size to 1024x768. This size is available for screen resolutions or 1024.768 or higher. Note: Changing the font size will also change the size of the FIMS window and any objects within the window. For example, setting the font size to Large also sets the size of the FIMS window to 1024x768 (so it would take up the entire screen if your resolution was set to 1024x768). Note: The font style will always be MS Sans Serif, regardless of the size.
MaximizeWindows	Maximized, Minimized and Normal	Choose Maximized to initially open FIMS windows maximized. Default is to use match System Option setting. Default for System Option Settings is maximized for NPact hosted FIMS and normal for self hosted FIMS. Settings take affect next time FIMS is run.
Multiple Windows	Yes No	Determines whether each FIMS module will open in a separate window. Choose Yes to use multiple windows or No to use a single window. Note: If you select <None>, the Multiple Windows setting selected via System Options will be used. Otherwise, the User Preference setting overrides the System Option setting.
Save As Dir	Selected directory path (for example, C:\Reports).	The default directory where you want to save reports (by selecting File > Save As in the FIMS Viewer). If you select <None>, the directory specified in the SaveAsDir Directory System Option will be used. Note: IMPORTANT: If that the SaveAsDir Directory System Option is also set to <None>, the working directory (FIMS) will be used. Do not use the FIMS folder for your reports.
Vertical Bar	Left Right	Determines which side of the data grid you would like the data grid toolbar to appear on – left or right. The default value is Left.

Was this article helpful?

What's Next

Get Help for FIMS